T5m Heat Exchanger Plate and EPDM Gaskets (Replace Alfa Laval Spare Parts M3, M6, M10, M15, M20, MX25B, M30, TS6M, TS20M, TL10B)

Heat Exchanger Plate Introduction to Plate Sheet The sheet is of unique linear and planar positioning structure, which can reduce the possibility for inter-sheet malposition; Fillets in the sheet are of "Interlocked" structure which allows for mutual interlocking of sheets. The...
Product description

T5m Heat Exchanger Plate and EPDM Gaskets (Replace Alfa Laval Spare Parts M3, M6, M10, M15, M20, MX25B, M30, TS6M, TS20M, TL10B)

Heat Exchanger Plate

Introduction to Plate Sheet
The sheet is of unique linear and planar positioning structure, which can reduce the possibility for inter-sheet malposition; Fillets in the sheet are of "Interlocked" structure which allows for mutual interlocking of sheets.
The herringbone corrugated sheet is featured by high heat transfer efficiency; in addition, net-shaped contacts are formed in mutually reverse directions after the entire machine is assembled, featuring good pressure resistance.

Angle Ripples

1. Design of large-angle ripples can raise heat transfer coefficient with fairly great reduction of resistance.

2.Design of small-angle ripples allows for reduction of degradation resistance and is featured by fairly low heat transfer coefficient.

3. Appropriate sheet type should be reasonably selected according to the parameters of working conditions at the time of design selection so as to achieve the best application effect.


图片1.png


Features

1.high heat transfer efficiency
2.net-shaped contacts
3.good pressure resistance

Plate Material : SUS304 , SUS316L , SMO254, Titanium , Nickel , Hastelloy Alloy
Plate Thickness : 0.24 in (0.6mm) , 031 in (0.8mm) and .039 in (1mm)



Material Description

Code

Applicable Temperature (degree centigrade)

Anti-corrosive Performance and Applicable Occasions

NBR

N

-20~110

Hot air, water, non-polar oil, mineral oil, lubricant and silicone oil, etc.

EPDM

E

-50~150

Vapor, polar chemical medium, alcohol, weak acid, weak alkali and oxidizing agent, etc.

CR

C

-40~100

Ammonia, mineral oil and lubricant, etc.

Fluorine Rubber

F

0~180

Inorganic acid, alkali, mineral oil and Haloalkane, etc.

Silicon
     Rubber

Q

-65~230

Resistant to cold current and dry hot



Workshop in Company 


图片2.png



Founded in 2005, JIEMA is one of the leading t5m heat exchanger plate and epdm gaskets (replace alfa laval spare parts m3, m6, m10, m15, m20, mx25b, m30, ts6m, ts20m, tl10b) manufacturers and suppliers in China for its excellent services and quality products. Welcome to buy the customized heat exchanger at cheap price from our factory. We can also offer you the quotation consultation if you need.

Related Products
Feedback

Copyright © Guangzhou Jiema Heat Exchange Equipment Co.,Ltd. All Rights Reserved.Tel: +86-20-82249117